J-Link ARM
J-Link, JTAG emulator for ARM7/9 cores
 |
J-Link is a USB powered JTAG emulator for ARM
cores. It connects via USB to the Windows (2000/XP/Vista) PC host. J-Link
supports any ARM7/9 and Cortex-M3 core including thumb mode and can be used for
debugging, flash programming or communication with the core via DLL
(allows full access to J-Link). J-Link works very efficient and achieves
download speeds of 720 kbytes/s. Additional software packages (J-Flash,
RDI software, flash breakpoints) are available. |
Adapters
J-Link JTAG Isolator
 |
The J-Link JTAG Isolator can be connected between J-Link ARM and any ARM-board that uses the standard 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application. |
JTAG 14 pin connector
 |
An adapter is available to use J-Link ARM with targets using this 14 pin 0.1" mating JTAG connector. |
5V Adapter
 |
The 5V adapter extends the voltage range of J-Link ARM (and other, pin-compatible JTAG probes) to 5V (since J-Link hardware version 5.4, J-Link is 5V tolerant) |
Starter Boards
emWin Starterkits
 |
The emWin starter boards are for test and demonstration
purposes only. They have been designed primarily to test and demonstrate
our software, and they can be used to get familiar with our software.
We can ship them with demonstration software which is "ready-to-go".
However, these boards may also be used to get familiar with the microcontroller
and the other development tools such as the debugging software and
the "C"-compiler. Complete schematic is included. [currently not available] |
Flash Programmer
Flasher, in-circuit flash programming tool
with on-chip flash
 |
| Flasher ARM |
Programming tool for ARM microcontrollers with on-chip or external Flash memory |
| Flasher ST7 |
Programming tool for ST7 series of flash microcontrollers |
| Flasher 5 |
Programming tool for ST9 and Renesas M16C/20, M16C/62, M16C/80, M32C, R8C, R32C,
M38 and M79 series of flash microcontrollers in serial mode
(1.5 MByte FLASH to store target program, remote control functions
for automated testers) |
| Flasher 5T |
Programming tool for Toshiba TLCS-870/C and TMP91 seriesseries |
Copyright SEGGER Microcontroller GmbH & Co.KG. All
rights reserved.
For more information, please visit our web site
www.segger.com or contact us at info@segger.com
Last update:
November 5, 2008
|
Hardware
products
