- USB-driven JTAG and Trace (38-pin Mictor) interface
- Supports all ARM7 and ARM9 devices
- Free updates
- No power supply required, powered through USB, although external power supply plug is available
- JTAG speed 12 MHzAuto speed recognition
- USB 2.0
- Adaptive clock based on RTCK JTAG signal
- All signals can be monitored, target voltage can be measured
- 20-pin standard JTAG connector, 38-pin standard Trace Mictor connector
- USB, 20-pin flat cable and 38-pin trace cable included
- Full integration with the C-SPY Debugger; advanced debugging features available from C-SPY
- Integration into IAR Embedded Workbench for ARM makes setup and use easy
- Supported platforms: Windows, Linux, macOS
- Has all the J-Link functionality [More..]
- Hi-Speed-USB 2.0 interface
- JTAG speed: 25 MHz
- Works with all currently available Cortex-M devices at 100 MHz trace clock
- Supports tracing on Cortex-M targets [More..]
- Free updates
- 16 MB trace buffer
- Trace and streaming probe
- Real-time streaming of events and system ticks
- Tune your application with live profiling
- Satisfy regulatory requirements with instruction-level code coverage
- Isolate and Identify hard-to-find code defects with unlimited trace
- Supports Streaming Trace [More..]
- Supports Cortex-M microcontroller [More..]
- Full J-Link debug functionality [More..]
- Streaming Trace probe with USB Superspeed interface
- Real-time streaming at full System Clock
- Tune your application with live profiling
- Satisfy regulatory requirements with instruction-level code coverage
- Isolate and Identify hard-to-find code defects with unlimited trace
- Supports Streaming Trace [More..]
- Supports Cortex-A/R/M targets [More..]
- Full J-Link debug functionality [More..]
- Real-time streaming trace at full System Clock
- Tune your application with live code profiling
- Satisfy regulatory requirements with instruction-level code coverage
- Isolate and identify hard-to-find code defects with unlimited trace
- Full J-Link debug functionality
- ETM trace pins fully supported up to 75 MHz Traceclock
- 1 kV DC isolation
- 1.2 V - 5 V target operation supported
- Powered from emulator, only few microamps (< 25 µA) drawn from target
- JTAG standard 19-pin connection supporting TDI, TMS, TCK, TDO, RESET and SWD/SWO signals
- SWD frequency: Up to 4 MHz
- JTAG frequency: Up to 50 MHz
- 3 LEDs to indicate emulator power, target power and target RESET
- Perfect for quick and simple trace setups
- Small footprint for optimal portability
- Numerous target devices to choose from
- Can be powered through the J-Trace PRO V2, no additional cabling required
- 3 LEDs implemented for flexible use in trace demo applications
- All trace signals available as test points for easy measurement setups with oscilloscopes