MIPI-60 Adapter
![SEGGER Debug & Trace Probes SEGGER Debug & Trace Probes](https://c.a.segger.com/fileadmin/_processed_/1/7/csm_Product_Category_Icon_DebugProbes_01_ff9ef6a9a0.png)
Overview
The MIPI-60 Adapter allows JTAG connections between J-Link, J-Trace or Flasher and Jacinto7 TI target hardware systems. It provides a 19-pin JTAG/SWD and Trace connector, which allows TPIU tracing with up to 4 pins, and an Arm Standard 20-pin connector.
![J-Trace Pinout J-Trace Pinout](https://c.a.segger.com/fileadmin/images/products/J-Trace/jtrace-pinout.png)
![J-Link/J-Trace JTAG/SWD 20-Pin Arm Adapter pinout J-Link/J-Trace JTAG/SWD 20-Pin Arm Adapter pinout](https://c.a.segger.com/fileadmin/images/products/J-Link/Accessory/Adapters/JTAG.png)
Pin | Signal |
---|---|
1 | VTREF |
2 | TMS |
3 | TCK |
4 | TDO |
5 | TDI |
6 | RESET |
7 | RTCK |
8 | TRST PD |
9 | TRST |
10 | Not connected |
11 | Not connected |
12 | VTREF |
13 | TRC CLK |
14 | Not connected |
15 | GND |
16 | GND |
17 | TRC CTL |
18 | Not connected |
19 | TRC DAT0 |
20 | Not connected |
21 | TRC DAT1 |
22 | Not connected |
23 | TRC DAT2 |
24 | Not connected |
25 | TRC DAT3 |
26 - 56 | Not connected |
57 | GND |
58 | GND |
59 | Not connected |
60 | Not connected |